 |
|
MS3X Expansion Board |
|
Now Available!!
Please Note:
You don't need the MS3X in order to have some of these options on an MS3 ECU (or any of the MS ECU's I sell).
Some are available as add ons to the main board without the MS3X, see HERE for more details.
This is an extra board that plugs into the MS3 daughter board. This makes the MS ECU 3 layers high:
1: Main board (V3.0 or V3.57)
2: MS3 daughter Board
3: MS3X expansion board.
This option is only available for the MS3 ECU and it gives you the following inputs and outputs:
8 x Logic Level Spark Outputs - These are 5V triggers for COPs with built in ignitors (e.g. Yukon LS2) and can NOT drive a coil directly.
8 x High Current Injector Bank Drivers - These are capable of driving high impedance injectors (NOT lo-impedance)
4 x Logic Level Inputs - 3 that need to switch to ground, 1 that needs to switch to +12V. They can be used to control options like Launch, datalogging, N2O, switch maps, etc.
6 x Medium Current Outputs - For controlling NOS, Idle valves, Boost valves, tacho, etc.
3 x Spare ADC inputs - 0-5V inputs for second O2, etc.
1 x VR / Hall sensor input - This gives the ECU a total of 2 trigger inputs, e.g. one for the cam and one for the crank.
Please Note:
You don't need the MS3X in order to have some of these options on an MS3 ECU (or any of the MS ECU's I sell).
Some are available as add ons to the main board without the MS3X, see HERE for more details.